End Tooling

Vibcon Corporation can supply all types of end tooling for our systems. We do a lot of work for machine builders and therefore, over the years, have expanded our capability to better serve them by furnishing tooling to mate with their systems, including:

• Deadnests - These are generally hardened steel nests at the end of our tracking that present one part for pick-off by the customer. When the operator removes a part, another will immediately move into position.
• Shuttle - This is a version of a deadnest except it has a pneumatic cylinder that will move the last part sideways or straight up to remove any back pressure.
• Escape And Blow - Some parts that can be blown through plastic tubes and remain oriented can be fed to the customer's nest or receiver with this mechanism. It shuttles one part at a time and blows it through a tube on demand.
• Pick &Place - This mechanism can be pneumatic or mechanical. It picks up one part at a time from a deadnest and places the part into the customers tooling. There are three versions: 1.) slides and grippers   2.) robot   3.) dedicated purchased mechanism.

Tooling Configurations

Warranty

All Vibcon systems come with a one year/one million cycle warranty, although an extended warranty is also available upon request. Diligent service is our specialty.Regardless of the size of your operation, you can expect to be treated with the same level of interest and enthusiasm at Vibcon. Each new project we receive presentsa new challenge and learning experience. In fact, the knowledge that we bring to your project is cumulative. Often the lessons from a previous client's parts handlingdilemma may very well hold the solution to yours.Whether your system is new, old or not even a Vibcon System at all, we will respond promptly. Likewise for rebuilding and repair. Our system or not, Vibcon is yourresource for spare and replacement parts. Feel free to fax or Email your specifications and we'll quote your job diligently and quickly. We service all 48 contiguousstates.When entrusting a vendor with a project that has such great potential to affect productivity, it pays to be certain. That's why we encourage our customers to contact ourreferences, ask questions, and meet with our staff. We're confident that after doing so you'll agree that at Vibcon we're not only building dependability, we're building tradition.

Critical Options

Vibcon Corporation builds not only bowls but also special floor feeders and non standard conveyors. This diversification enables us to offer the best system for your application. In fact, many parts that are too large or not suited to feeder bowls are better suited for a floor feeder system. From a 1 to 50 cubic foot standard floor feeder hopper to a specially tooled gravity or opposing belt system, accumulator table or magazine loader, Vibcon can fulfill your requirements. All components are designed and sized for durability. Most drives are supplied with torque limiters for safety. In addition, Vibcon builds a small, 1 to 6 cu. ft., "Space Saver" floor feeder hopper that mates well with virtually any feeder bowl and offers options and variations to handle any situation. Each is designed for maximum efficiency, operator friendliness and safety.

Vibcon is also your source for many types of "non standard" conveyors. Vibratory, belt, magnetic, chain, or just about any other type, if you can't find it in a standard catalogue, call Vibcon. We can probably design and build it for you.

Save space and save backs with Vibcon floor feeders. Standard or space-saving floor feeders can carry feeding material to the highest bowl setup.

All projects start in the Vibcon Engineering Department where details are finalized with drawings and material lists are created. Next, raw materials are cut and other components are assembled. Once a system builder is assigned to a particular job, he follows that job through completion, assuring a tight, well integrated system. Systems are checked, timed and rechecked. Barring revisions, it's on to painting, coating, if necessary, and prepared for a run off. After a final client inspection is made, the system is ready to install.

Quality

Vibcon Corporation delivers excellent quality every time. Whether production requirements are a single component or a complete system, Vibcon technicians expertisein the industry assures the capability to solve the most challenging feeding problems. Our commitment is guaranteed in writing..

Service

Service at Vibcon Corporation begins with the initial customer contact. This may be directly with the home office or through one of several Area Representatives. Necessary time is taken to get a complete understand ing of every application. Then the best method is selected to meet production requirements for each part. Once a system is installed, Vibcon service continues. When production requirements demand a tooling change, repair, or system modification, Vibcon technicians provide the solution. This same service is available on existing customer systems and equipment.

Innovation

Production requirements change continually requiring more complex systems, including new electronics and robotics applications. Vibcon technicians are, therefore, increasing their knowledge in these areas. This new knowledge is applied to these and other Research and Development projects.

Dependability

At Vibcon Corporation, your production requirements take first priority. Our reputation is built on meeting our customers' needs for quality systems, superior service and on time deliveries, helping you increase productivity. Let Vibcon design and build your next parts feeding system. Call your local Vibcon Representative or our Sales Department at 317/984-3543 or use our 24 hour FAX 317/984-3545.

Industries Served

Vibcon Corporation serves the medical, pharmaceutical, automotive, food, cosmetic, consumer products, armaments and munitions, and electronics industries.