"SPECIALISTS IN VIBRATORY AND NON-VIBRATORY PARTS FEEDING SYSTEMS"




At Vibcon we maintain a high level of proficiency and pride ourselves in providing the manufacturing industry with quality feed systems.  

  TRACKING                                 

                Vibcon Corporation offers a variety of different tracking for our feed systems.
   
         
                     INLINES - These are powered horizontal vibratory tracks normally used to store pre-oriented parts, get the exit point away
                                        from the bowl or into your machine and to furnish a location for a full track switch to shut down the feeder when
                                        the track is full. We make standard and mini inlines. Both styles can be made any length except the mini can be no
                                        shorter than 6" long and the standard no shorter than 14" long.

                     GRAVITY TRACKS - These are basically non-powered tracks using gravity to function and are used as inexpensive way to
                                         track parts or in some cases can "snake" through tight locations. The can be designed for any angle or length, but
                                         we generally encourage a minimum of  30 - 35  degree down angle to get the full effect of gravity. The track can
                                         be bent at the end to match any angle.

                      BELT/CHAIN CONVEYORS - These conveyors use powered belts and/or chains to move the parts. The parts can be
                                         confined as with the inlines and gravity tracks and can have variable or constant speed motors.

                   Other types of tracks are available on request.